银河配资,10倍股票配资,主力配资炒股,股票按天配资

What is the reason why the spot welding machine cannot weld
Release time:2023-06-27
What's the reason why the spot welding machine can't hold on? There are many reasons why a spot welding machine cannot weld properly. Firstly, the material being welded. Secondly, the power cord connected is thin and not powerful enough to weld properly. Thirdly, the machine itself is faulty. The main inspection is to check whether the high current components are burned out, and then to check whether the welding needle has poor oxidation contact and whether the spot welding electrode is short circuited.

Reasons for weak welding of spot welding machine:
1. If the current is too low, adjust the current;
2. If the contact is severely worn, replace the contact or remove it and polish it;
3. Insufficient air pressure, check if the compressor is working properly;
4. The contacts are not on the same horizontal line, causing some points to be welded firmly while others are not welded firmly.

  • WeChat QR code

  • WeChat official account

  • Tiktok enterprise account
Shenzhen Fusite Electronics Co., Ltd
  •  
    website:   www.styler.com.cn  
  •  
    Company Address: 921 Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, Shenzhen, Guangdong Province
Dongguan Chuangde Laser Intelligent Technology Co., Ltd
  •  
    Phone: 13580722659
  •  
    Fax: 0769-81306766
  •  
    Email:   sales@styler.com.cn  
  • sp.png
    video website:http://www.dg-cddz.com
  •  
    Company Address: Building D, No. 81 Huahong Commercial East Street, Zhenxing North Road, Gaobu Town, Dongguan City, Guangdong Province
  •  
    Suzhou Office Address: No. 888 Yunchuang Road, Wujiang Economic and Technological Development Zone, Wujiang District, Jiangsu Province
CopyRight ? 2024 Dongguan Styler Laser Intelligent Technology Co., Ltd. All Right Reserved.粵ICP備19159359號